 
|
Monolithic Silicon Carbide Ballistic Plate with 2550+ HV Hardness and 200x200mm Single Piece for NIJ Level IV Protection
Λεπτομέρειες:
| Τόπος καταγωγής: | Χουνάν, Κίνα |
| Μάρκα: | High Broad |
| Πιστοποίηση: | ISO 9001:2015, NIJ 0101.06 Level IV |
| Αριθμό μοντέλου: | sic πλακάκια |
| Έγγραφο: | SIC Ballistic Armor Tiles-P...ad.pdf |
Πληρωμής & Αποστολής Όροι:
| Ποσότητα παραγγελίας min: | 1000 τεμάχια |
|---|---|
| Τιμή: | USD0.1-2 / Piece |
| Συσκευασία λεπτομέρειες: | Ατομική φωλιά αφρού EPE + σφραγισμένη τσάντα κενού + ενισχυμένη θήκη από κόντρα πλακέ εξαγωγής |
| Χρόνος παράδοσης: | 7-10 εργάσιμες ημέρες για το απόθεμα, 20-25 ημέρες για την παραγωγή |
| Όροι πληρωμής: | T/T,L/C,Western Union |
| Δυνατότητα προσφοράς: | 10000 Τεμάχια το μήνα |
|
Λεπτομερής ενημέρωση |
|||
| Πυκνότητα: | 3,10-3,15 g/cm³ | Καμπτική Αντοχή: | 400-480 MPa |
|---|---|---|---|
| Μέγεθος πλακιδίων: | 200x200mm | Τοπική πυκνότητα: | ≤42 kg/m² |
| Ανθεκτικότητα σε θραύση: | 3,8-4,8 MPa·m½ | Πάχος: | 10.0mm |
| Επισημαίνω: | Monolithic SiC Armor Plate,NIJ Level IV Protection,High Hardness Ceramic Panel |
||
Περιγραφή προϊόντων
Unlike multi-tile arrays that introduce seam vulnerabilities, this is a single-piece monolithic ceramic plate. There are zero internal seams, zero adhesive joints, and zero discontinuity zones within the 200x200mm protected area.
When appropriately backed with UHMWPE or aramid composite, this plate meets NIJ Level IV threat protection requirements. Our pressureless sintered SiC achieves 2550+ HV hardness economically—making monolithic protection accessible at a fraction of the cost of monolithic B4C, which is technically impractical at this scale.
| Material | Monolithic Feasibility | Ceramic Thickness for NIJ IV | Relative Cost |
|---|---|---|---|
| HB SiC | ✅ Yes (up to 200mm) | 10-12mm | ★★ Moderate |
| Boron Carbide B4C | ⚠️ Limited (≤100mm) | 8-10mm | ★★★★ Very High |
| Alumina Al2O3 | ✅ Yes (large format) | 14-16mm | ★ Low |
SiC is the only practical monolithic solution combining NIJ IV capability with manageable cost.
- Zero Seam Vulnerability: No internal seam lines means no weak zones for threat penetration. The monolithic structure provides 100% uniform protection density across the entire 200x200mm coverage area.
- Optimized for AP Threat Defeat: The 10mm thickness combined with 2550+ HV hardness provides the ceramic mass and surface hardness necessary to erode and fracture armor-piercing cores at NIJ Level IV velocities.
- Edge-to-Edge Uniformity: Every point on the plate surface has identical ceramic composition, density, and thickness—impossible to achieve with multi-tile arrays where seam zones create property discontinuities.
- Simplified Composite Lamination: Single-piece ceramic layer dramatically simplifies panel assembly—no tile placement, no gap filling, no multi-piece alignment. One ceramic plate, one backing lamination cycle.
Experience the monolithic difference—request your quote today
Email: janehu@hbnewmaterial.com
Custom dimensions and ballistic test reports available upon request
